It can receive wireless signal wireless sensors and gives off strong strobe light with high siren volume. Once the detector is triggered, it can give off strobe light with high siren at the same time to scare away the intruders.
Feature -Waterproof case -Intelligent control -Built-in backup high-energy lithium batteries -Tamper alarm
Technical parameter -Power consumption: static: ≤16 m Dynamic: ≤220 m -Back-up battery: 3.7v 4400ma / h -The solar charging current: 180mA -Electricity charge: 110 ~ 240VAC, USB 5V, charge time: ≤12 hours -Continuous cloudy standby time: ≤10 days -The longest sound and light alarm time: 3 minutes. -Receiving distance: ≥150 meters (open area) -Alarm volume: ≥105db.
Install and use -Open the battery switch or via USB power supply, siren "drip" sound, LED light flashes 5 Next extinguished into standby mode, will flash every 5 seconds -The siren and wireless alarm host by studying the mating success of learning is connected with the operating instructions -After studying the mating success off the power, and then select the appropriate location, by installing a hanging hole and then turned on permanently installed power supply -Wireless sound and light alarm after alarm is triggered the longest time is 3 minutes, or automatically stop when the radio alarm panel is disarmed -When the LED is no longer flashing about every five seconds, it means the battery voltage is low, shall be charged -Removing the power is wireless siren will immediately sound and light alarm
How to connect with alarm system:
1,Connect power supply firstly,press red studying button and you will notice the alarming lights on. Then press the “ ”from LCD alarm host,and then disarm by LCD alarm host, you would notice the alarming lights sparkle for 5 times then go off,it means successfully in learning.
2,one wireless outdoor siren can connect to 10 wireless alarm host at most;
3,If you want to delete sensor,the step is as follows: Press the red studying button for 10 seconds, you will notice the alarming lights would be on once then go off immediately, it means successfully in delete.(Notes: This step will delete all which connected to alarm host)
4,When alarm host alarming, the wireless siren will automatically loudly alarming up to 3 minutes, if you hope it stop alarming, you can make disarming from wireless alarm host.
5,If back up battery’s voltage under 5VDC,the charging power light would be on, and it will being to charge battery automatically for about 20 hours, it means finished charging power if this charging power light go off.
3.After-Sale: 1)All products will have been strictly Quality Checked in house before packing
2)All products will be well packed before shipping
3)All our products have 2 years warranty,and we sure the product will be free from maintenance within warranty period.
Sample order in stock,1-3 working days,and 3-7 days for bulk production.
You can pay for the order via T/T western union,paypal & moneygram
We have strong cooperation with DHL,UPS,FEDEX,EMS,CHINA Air post,
you can also choose your own shipping forwarder.
We are a professional manufacturer of home alarm system in China mainland with over 7 years of developing, producing and marketing of home wireless, wired alarm system kits, including wireless PSTN alarm system, GSM alarm, PSTN plus GSM dual network alarm system , CCTV camera and DVR as well as pir sensor, detectorswhich are popular in the world wide and widely used for home, office, shop, hotel and so on